MidAm MushroomsMycology Lab · Northwest Ohio
Commercial Mushroom Grow Guide
Grower guide · Logs, straw & sawdust blocks

Follow the mycelium

Seven stages from a chosen strain to a full cooler, with the numbers we use in our own lab.

Built on the Cornell Small Farms and Fungi Ally commercial cultivation guide, and on MidAm's variety data and production practice.

A MidAm blue oyster block in full flush
55–75°F
Where most varieties fruit
85%+ humidity
First 4 days of pinning
Under 1,000 ppm
800 for oysters
CO₂ in the fruiting room
34–37°F
about a week
Cooler temp & typical shelf life
↓Every grow is a race. Start here.
Before stage one

Which method fits your farm?

Four methods are within reach of a new or diversified farm. Tap one to see what it asks of you.

Outdoors or indoors

Mimic the forest
Outdoors
  • Low startup cost and very little gear
  • The woods supply shade, humidity and airflow for free
  • Far less energy over the life of the crop
  • Seasonal. Only forced shiitake logs and blocks fruit on a weekly schedule
  • Moving logs is real labor, and weather decides more than you do
Control the room
Indoors
  • Year-round harvests on a schedule
  • Higher, steadier yield per pound of substrate than logs
  • Fits a barn, basement, trailer or warehouse you already have
  • Higher upfront cost, plus power, water, heating and cooling
  • Someone has to watch the room every day

Many farms run both. Logs come inside to stretch the season, and blocks go outside when the weather is right. We fruit oysters indoors, because outdoors flies often lay eggs in them.

Three ways to get blocks

Most control
Make them

A lab, steam sterilization, training, and real space and startup cost. You choose the strain and the recipe.

Fastest start
Buy ready-to-fruit

A walk-in cooler and working cash. The lab work is done, and flushes are predictable from week one. This is what a MidAm farmer block is: 10 lb, made to order.

Least cash
Buy second-flush

A local farm sells them cheap after its first harvest. Lower, less regular yields, then good compost within a year.

The one rule that matters most

Get your mushroom established before anything else does. Every stage below, clean substrate, enough spawn, even mixing, steady temperature, is a way of winning that race against the molds and bacteria that want the same food.

Our library

What can your room grow?

Set the temperature your fruiting space holds. The varieties that fruit there light up. These are MidAm's farmer-block strains and our own numbers for a 10 lb block.

Ranges are where each strain fruits well for us. Strain, substrate, season and your room all move them, so treat every number in this guide as a starting point and adjust to what the mushrooms show you.

1
Stage one

Choose your strain

The cheapest decision on the farm, and one of the largest. Strain is to a mushroom what breed is to a dog.

One species, thousands of strains. Each sets how fast the mycelium runs, the fruiting temperature, cap color, shelf life and yield.

The spread is large. In side-by-side trials, the best strain out-yielded the weakest by three to five times on the same substrate.

Spawn is your seed. Mycelium of a known strain, grown clean in a lab. It comes as grain, sawdust or plugs, and as liquid for growers making their own blocks.

Ready-to-fruit blocks arrive with the strain already chosen for that substrate. Every MidAm block carries a strain number, such as MAM-062 Blue Oyster, so you can reorder exactly what worked.

Same species, same substrate, different strain
Shiitake on logslb per log 0.5 weakest 2.3 best 4.6× Shiitake on blockslb per 5 lb block 0.3 weakest 1.4 best 4.7× Cordyceps in jarsgrams per jar 3.5 weakest 11.8 best 3.4×
Fungi Ally strain trials, reported by Cornell Small Farms. The top strain on logs finished last on sawdust, so match the strain to the substrate you run.
If you make your own spawn

Trial 4–5 strains side by side on your substrate, in your room. Test a new one every couple of months. A strain that wins on another farm can lose on yours.

2
Stage two

Prepare the substrate

Substrate is the food. Richer food grows more mushrooms, and more of everything else, so it needs a harder clean.

Climb the treatment ladder. Tap a step.
More gear, faster run, higher yield →
Inoculate in the open, clean hands and tableInoculate in a lab-clean space

Straw, three ways

Shred it first. Chopped straw packs tighter and gives mycelium shorter gaps to cross, and yields rise with it. A shredder runs $500–1,000. A string trimmer in a drum or a mower over a tarp also works.

Cold ferment
5–10 days
under water

Bacteria that live without air clean the straw. Fast in summer, slow in the cold.

Honest take: contamination runs high. Fine for learning, a poor bet for production.

Lime soak
16–18 hours
at pH 12–13

Dose by pH, not by scoop. Start with about 2 cups of hydrated lime in a 55-gallon drum, mix, test, and add more until strips or a meter read 12–13.

Read the bag: magnesium must be under 10%. Do not soak longer.

Hot pasteurize
140–160°F
for 2 hours

Heat to 180°F, kill the burner, lid on. The drum coasts down through the range on its own.

Then: drain, spread out, inoculate below 100°F.

A hot pasteurization run
140–160°F for 2 hours 180°160°140°100° BURNER OFF, LID ON DRAIN, SPREAD INOCULATE heatingcoasting, about 2 hourscooling
Check the middle of the batch with a probe thermometer. An infrared gun only reads the surface. Some growers get clean straw in as little as one hour in the range.

Pack it tight. Use filter-patch bags, 10 in tubing, or 5-gallon buckets with 5/8 in holes every 6–8 in in a diamond pattern. Mix the spawn through, or add a handful every 3–4 in as you fill. Loose pockets dry out and stall.

Lime water burns

A pH 12–13 bath is caustic to skin and eyes, and the dry powder is hard on lungs. Wear splash goggles, chemical-resistant gloves and a dust mask while you mix. The spent water will kill plants and soil life where you dump it, so bring it back toward neutral with a pH-down product first.

3
Stage three

Inoculate

Spawn meets food. Two choices decide how fast your mushroom wins the race: how much spawn, and where you put it.

Where depends on the food. Logs, chips and straw can be inoculated in open air with clean hands and a clean table. Supplemented sawdust, grain and agar need HEPA-filtered air and a space kept only for that work.

How far will you stretch one 5 lb bag of spawn?
Spawn : substrate
Time to colonize
Contamination
Spawn cost per bag
Fungi Ally trial with shiitake on 5 lb supplemented sawdust bags. More spawn buys speed, not more mushrooms. Your own sweet spot depends on strain, substrate and room.
Same spawn, same bag, two ways to place it
Mixed through Left on top
Ten extra days is shelf space you cannot refill, and ten more days for a mold to find the bag. In straw tubes and chip beds, layering spawn and substrate does the same job as shaking.

Inside our lab: how a MidAm block is made

The same seven stages, at production scale. Every farmer block we ship has been through these six steps before it reaches your fruiting room.

Steam50 bags per batch, 9 hours at 212°F.
Cool under HEPA24 hours. Bags stay closed until spawning.
InoculateTen 10 lb bags per row, in front of two 2 × 4 ft HEPA filters.
SealEach bag goes through the band sealer, neck upright.
TumbleA rotating tube, 3 ft across and 10 ft long, mixes the spawn all the way through.
ShelvePacked down by hand and loaded for incubation.
Our rate: one 3 lb bag of grain spawn, or 1 liter of liquid spawn, for each row of ten 10 lb bags. That is about 1 lb of grain spawn to 33 lb of substrate.
New to this? Spawn heavy

A high spawn rate covers for small mistakes while you learn. Once your bags run clean batch after batch, lower the rate a step at a time.

4
Stage four

Incubate

About four days in, mycelium leaps off the spawn. Each point grows outward as a ball until they meet and the whole bag, bed or log becomes one organism.

How long the spawn run takes
2 weeks1 month3 months1 year3 years Oyster on sawdustMost specialties on sawdustOyster on strawShiitake on sawdustWood chip bedsOyster logsShiitake logsStumps 10–20 daysabout 21 days14–28 days6–12 weeks2–12 months4–12 months6–18 months24–36 months Indoors, in bags Outdoors
The scale is stretched so days and years fit on one chart. Dense wood runs slow, loose sawdust runs fast.

Indoors: the heat is inside the bag

Growing mycelium makes its own heat, so the core of a 5 or 10 lb bag typically runs 10–15°F warmer than the room. Bigger bags and faster strains run hotter. Light and CO₂ do not matter at this stage. Temperature does.

Set the room. Watch the core.
A HAND'S WIDTH BETWEEN BAGS core temperature
In a full, well-insulated room, cooling matters more than heating. The crop warms itself.

Shiitake takes longer, and wants to be left alone

Two things cost you the shiitake crop

A cold dip below 55°F after week four, or handling and rearranging the blocks, makes them fruit early inside the bag and yields drop hard. Blocks that touch will not popcorn at the contact patch and will not fruit there.

Outdoors: do not let it dry out

Logs
The dime test

When the cut ends crack wide enough to hold a dime, soak the logs 6–8 hours. In summer that should come up no more than once a month.

Wood chip beds
4 in deep, in shade

Water at inoculation, then once a week for a month. After that a deep, shaded bed holds its own moisture.

5
Stage five

Initiate fruiting

A fully colonized block switches from growing to fruiting when it gets cooler air and more oxygen. You send the signal.

Keep the plastic on. The mycelium is one organism and sends its energy to wherever fresh air reaches it. Small openings concentrate the flush, and the bag holds humidity around the rest of the block.

Pick a species. Make the cut.
6
Stage six

Fruit

Four dials: temperature, humidity, fresh air and light. The mushrooms tell you which one is off by the shape they take. Pick a variety, turn the dials and see.

    Try a room

    Temperature ranges are MidAm's for each strain. The humidity, CO₂ and light rules are general starting points from the Cornell guide. Humidity matters most in the first four days, while pins form.

    Fresh air, with the math

    Mushrooms breathe like we do. A sealed room of blocks runs out of oxygen and fills with CO₂. Plan to replace all the air every 5–10 minutes, with intake and exhaust fans running together.

    Size your fan
    This is a sizing estimate, not a guarantee. Filters, ducting and bends cut a fan well below its rated CFM, so enter what you think it really delivers. One air change on paper replaces most of the air, not all of it. The per-block figure is MidAm's own first-pass estimate: about 1 CFM of outdoor air per fruiting 10 lb block, averaged over the hour, to hold under 1,000 ppm, and 1.5 CFM to hold under 800. Set the timer from this, then correct it with a CO₂ meter in the room.
    Blast it, don't trickle it

    A strong fan that clears the room in a minute or two does more than a small fan left running. Count the cost of that air as well: every exchange brings in outdoor heat, cold and dryness that your heater, cooler and humidifier then have to correct.

    Build the humidifier

    A fog tote is the workhorse of a small fruiting room: a reservoir, a floating mist maker and a fan that pushes the fog down a duct into the grow space. This is the build we use.

    Diagram of a fog tote humidifier: mist maker on a float, fan blowing down through the lid, 4 inch duct out to the grow space, humidistat and GFCI power strip, UV light in the water
    • Tote and lid. Cut a 3.75 in hole for the duct adapter and one for the fan.
    • Mist maker on a float. The kit includes the transducer, float and power supply.
    • Waterproof fan with speed control. Mounts on the lid blowing down. Dry air in, fog out.
    • 4 in duct adapter. Bolts to the lid and takes standard 4 in flex duct to the tent or room.
    • Humidistat into a GFCI strip. It switches the fan and mist maker together.
    • Cord port above the water line. Wrap the cords in soft foam to seal it.
    • UV light in the water. On its own plug or a timer, at least 3 hours a day, to keep the reservoir clean.
    • Auto-fill valve. Optional, and worth it once you trust the room.
    Water and mains power share this box. Use a GFCI, keep every connection above the water line, and unplug before you reach in.

    Fruiting blocks outdoors

    Set up
    Shade and a pallet

    Clear the leaf litter under trees. A pallet keeps the bottom mushrooms clean, and one 4 × 4 ft pallet holds about fifteen 5 lb blocks.

    Water
    2–3 mists a day, 4 days

    A low tunnel of hoops and greenhouse plastic holds humidity through pinning. Under it, one hose-down a day for five days is enough.

    After a soak
    Dry 12–24 hours

    Let soaked blocks air out before the plastic goes back over them. Wet blocks under cover grow green mold.

    Second flush
    Rest 3 weeks

    Then let rain bring the flush, or run a sprinkler for 24 hours. Spring and fall flushes are often the best looking mushrooms of the year.

    7
    Stage seven

    Harvest and cool

    The window is short. Pick by the shape of the cap, then get the heat out fast.

    Drag to grow the mushroom. Find the window.

    Every day
    Shorter above 75°F

    Below 60°F you can pick a few slightly early and skip a day.

    Container
    Rigid and vented

    Cardboard boxes or plastic crates with holes. Mushrooms need to breathe, and they bruise in a soft bag.

    Cooler
    34–37°F, at once

    Picked at the right stage and kept cold, most hold about a week. Shiitake and king trumpet keep longer. Oyster and lion's mane keep less.

    The block
    Clean the cut

    Remove every bit of stem. The next flush comes from the same opening, and leftovers rot there first.

    Handle each mushroom once

    Pick straight into the case you will sell. The torn cap edges on grocery-store oysters come from being moved from container to container. A farm that picks into the final 5 lb case delivers a better mushroom than a store can.

    Put it together

    Build your grow plan

    Tell us what is arriving and when. You get a dated plan for that variety: how to open it, what to hold the room at, when to expect the harvest, and what to watch.

    When it goes sideways

    What are you seeing?

    Start from the symptom. Tap one to see what it usually means and what to do.

    Screenshot this

    The whole cycle at a glance

    Before you start
    Strain
    Match it to substrate and season
    Day 0
    Substrate
    Wet it, clean it, pack it
    Day 0
    Inoculate
    Spawn mixed all the way through
    2 weeks to 18 months
    Incubate
    Near 70°F, a hand's width apart
    About 1 day
    Initiate
    Cut, soak or chill
    1–3 weeks
    Fruit
    Low 60s, humid, fresh air
    Daily
    Harvest
    Edge still curled, then 34–37°F

    MidAm variety quick reference

    All sixteen farmer-block varieties. Yield is per 10 lb block.

    No.VarietyFruiting tempYieldDifficultyHow to open it
    One universal rule

    Heat kills more blocks than cold does. The core of a bag typically runs 10–15°F hotter than the room, so keep incubation under 80°F and never let bags touch. A cool room only slows the run. A hot one ends it.